Akron Brass Style # 3462 Forestry Monitor

3462 Forestry Bumper Monitor The 300gpm rated monitor is to be an all electric single waterway monitor constructed of lightweight Pyrolite. The monitor shall have cast-in turning vanes in each elbow. The monitor shall have fully enclosed motors and gears with manual overrides for both horizontal and vertical rotation and may be operated simultaneously. The monitor is not to exceed 13 3/16” high and 11 9/16” wide. The vertical travel shall be from 45° below to 90° above horizontal with adjustable stops at -20° and +45°. The horizontal rotation shall be 320° with adjustable stops at ±90°. The control system electronics shall be integrated with the monitor wiring harness. The control system shall use sealed, locking connectors for the monitor and nozzle motors. Two additional sealed, locking connectors shall be supplied for input power/electric valve control and J1939 CAN bus interface. A sealed USB connector shall be provided for updating control system firmware. All electrical connectors shall be minimum IP65 rated. The operator interface shall consist of a CAN bus compatible joystick which will provide up, down, right, left, fog, and stream control of the monitor. The joystick shall have a trigger switch to control an optional electric discharge valve. The monitor shall include a 5’ long power/valve harness and 20’ long CAN joystick harness.